Connection to PC

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer of PG series, so you need to install the driver supplied with programmer.

• Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip

Before installing the driver, please, connect your programmer to computer.

PG Series

• Installing drivers in Windows XP
• Installing drivers in Windows 7

Plus\Mini Series

• Installing drivers for SFPTotal Plus\Mini

• Download software SFPTotal Wizard

Note

1. You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
2. Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.