Difference between revisions of "Connection to PC"

From SFPTotal Wiki
Jump to: navigation, search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the  system for programmer of PG series, so you need to install the driver supplied with programmer.
+
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the  system for programmer, so you need install the driver supplied for version of your programmer.
  
* Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip
+
Before installing the driver, please, connect your programmer to computer.
'''Before installing the driver, please, connect your programmer to computer.'''
+
  
''' PG Series'''
+
=== Plus and Mini Series ===
* [[Installing drivers in Windows XP]]
+
* [[Installing drivers in Windows 7]]
+
  
'''Plus and Mini Series'''
+
Download drivers for Windows 7/8 x64:  https://sfptotal.com/download/Drivers/SFPTotal%20Driver.zip
 
* [[Installing drivers for SFPTotal Plus\Mini]]
 
* [[Installing drivers for SFPTotal Plus\Mini]]
  
 +
After connecting the device to a PC green LED STATUS should flash, which indicates normal operation of device.
 +
 +
Download software [[SFPTotal Wizard]]
 +
 +
=== PG Series ===
 +
 +
Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip
 +
* [[Installing drivers in Windows XP]]
 +
* [[Installing drivers in Windows 7]]
  
* Download software [[SFPTotal Wizard]]
 
  
 
== Note ==
 
== Note ==
 
# You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
 
# You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.

Latest revision as of 14:23, 27 July 2018

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer, so you need install the driver supplied for version of your programmer.

Before installing the driver, please, connect your programmer to computer.

Plus and Mini Series

Download drivers for Windows 7/8 x64: https://sfptotal.com/download/Drivers/SFPTotal%20Driver.zip

After connecting the device to a PC green LED STATUS should flash, which indicates normal operation of device.

Download software SFPTotal Wizard

PG Series

Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip


Note

  1. You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
  2. Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.