Difference between revisions of "Connection to PC"

From SFPTotal Wiki
Jump to: navigation, search
Line 12: Line 12:
  
  
* Download software [[SFPTotal Wizard]]
+
Download software [[SFPTotal Wizard]]
  
 
== Note ==
 
== Note ==
 
# You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
 
# You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.

Revision as of 14:08, 18 July 2016

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer of PG series, so you need to install the driver supplied with programmer.

Before installing the driver, please, connect your programmer to computer.

PG Series

Plus and Mini Series


Download software SFPTotal Wizard

Note

  1. You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
  2. Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.