Difference between revisions of "User interface"

From SFPTotal Wiki
Jump to: navigation, search
Line 2: Line 2:
  
 
The unit of features and management is equipped with a buttons of quick access, menu of receiver type selection and tables, as well as with a block of special tabs.
 
The unit of features and management is equipped with a buttons of quick access, menu of receiver type selection and tables, as well as with a block of special tabs.
 +
 +
: '''1. Buttons'''
 +
: The buttons of quick access perform the following functions (Img. 2 from left to right)
 +
: Removing the content of the table with firmware (Table tab);
 +
:*Import firmware from a file located on your hard drive to a table (Table tab);
 +
:*Export the contents of the table (Table tab) to the file;
 +
:*Counting / checksum validation;
 +
:*Signature by manufacturer’s keys
 +
:*Reading firmware from the memory of the transceiver and write flash memory from tables in the transceiver.
  
 
::[[File:SFPTotal Main buttons panel.jpg]]
 
::[[File:SFPTotal Main buttons panel.jpg]]

Revision as of 16:26, 20 November 2015

The user interface is divided into two sections.

The unit of features and management is equipped with a buttons of quick access, menu of receiver type selection and tables, as well as with a block of special tabs.

1. Buttons
The buttons of quick access perform the following functions (Img. 2 from left to right)
Removing the content of the table with firmware (Table tab);
  • Import firmware from a file located on your hard drive to a table (Table tab);
  • Export the contents of the table (Table tab) to the file;
  • Counting / checksum validation;
  • Signature by manufacturer’s keys
  • Reading firmware from the memory of the transceiver and write flash memory from tables in the transceiver.
SFPTotal Main buttons panel.jpg
SFPTotal Module type selector 2.jpg
SFPTotal Table of firmware.jpg
SFPTotal Table of firmware detail.jpg
SFPTotal Table of firmware detail 2.jpg
SFPTotal Tab of batch loader.jpg