Difference between revisions of "Connection to PC"

From SFPTotal Wiki
Jump to: navigation, search
(Note)
Line 9: Line 9:
  
 
== Note ==
 
== Note ==
# You can also connect to the programmer using the applications to work with serial port. In this case you need to use the command protocol SFPTotal.
+
# You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the command protocol SFPTotal.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.
 
# Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.

Revision as of 23:44, 27 November 2015

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer of PG series, so you need to install the driver supplied with programmer.

Before installing the driver, please, connect your programmer to computer.

Note

  1. You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the command protocol SFPTotal.
  2. Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.