Difference between revisions of "Connection to PC"
From SFPTotal Wiki
(→Note) |
|||
| Line 9: | Line 9: | ||
== Note == | == Note == | ||
| − | You can also connect to the programmer using the applications to work with serial port. | + | # You can also connect to the programmer using the applications to work with serial port. In this case you need to use the command protocol SFPTotal. |
| + | # Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory. | ||
Revision as of 23:39, 27 November 2015
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer of PG series, so you need to install the driver supplied with programmer.
- Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip
Before installing the driver, please, connect your programmer to computer.
- Installing drivers in Windows XP
- Installing drivers in Windows 7
- Download software SFPTotal Wizard
Note
- You can also connect to the programmer using the applications to work with serial port. In this case you need to use the command protocol SFPTotal.
- Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.
