Difference between revisions of "Connection to PC"

From SFPTotal Wiki
Jump to: navigation, search
Line 1: Line 1:
 
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the  system for programmer of PG series, so you need to install the driver supplied with programmer.
 
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the  system for programmer of PG series, so you need to install the driver supplied with programmer.
  
 +
* [Download SFPTotal drivers Windows XP/Seven http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip]
 
'''Before installing the driver, please, connect your programmer to computer.'''
 
'''Before installing the driver, please, connect your programmer to computer.'''
  

Revision as of 23:33, 27 November 2015

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer of PG series, so you need to install the driver supplied with programmer.

Before installing the driver, please, connect your programmer to computer.