SFPTotal Mini

From SFPTotal Wiki
Revision as of 11:58, 19 February 2016 by Sfptotal (Talk | contribs)

Jump to: navigation, search
SFPTotal Mini HW 1.1

Programmer SFPTotal Mini allows to reprogram the SFP and SFP+ transceivers, and designed to address the main problems that arise in practice of Internet service providers, network equipment vendors and system integrators in the process of working with optical transceivers and switching equipment, and require reprogramming.

The device connects to your computer via a USB interface through which performed control and power supply for transceiver.

To connect a high-power transceivers can be used by external power adapter 5-12V DC.

Quick start

  1. Connect SFPTotal Mini board to your PC using micro USB Type B cable
  2. Install drivers
  3. Download application SFPTotal Wizard
  4. Start SFPTotal Wizard
  5. Insert transceiver to the programmer port

Control elements

LED indication

  1. POWER
  2. STATUS
  3. ERROR
  4. TX_ENA
  5. RX_ENA


Supported instructions