Difference between revisions of "SFPTotal Mini"

From SFPTotal Wiki
Jump to: navigation, search
(LED indication)
Line 18: Line 18:
  
 
=== LED indication ===
 
=== LED indication ===
 
+
* POWER
+
* POWER indicator lights up when the power is on the controller.
* STATUS
+
* STATUS indicator flashes when the power is on and waiting for the connection transceiver to the programmer port. When transceiver is connected, STATUS led is constantly light up.
 
* ERROR
 
* ERROR
 
* TX_ENA
 
* TX_ENA
 
* RX_ENA
 
* RX_ENA
 
 
  
 
== Supported instructions ==
 
== Supported instructions ==

Revision as of 12:03, 19 February 2016

SFPTotal Mini HW 1.1

Programmer SFPTotal Mini allows to reprogram the SFP and SFP+ transceivers, and designed to address the main problems that arise in practice of Internet service providers, network equipment vendors and system integrators in the process of working with optical transceivers and switching equipment, and require reprogramming.

The device connects to your computer via a USB interface through which performed control and power supply for transceiver.

To connect a high-power transceivers can be used by external power adapter 5-12V DC.

Quick start

  1. Connect SFPTotal Mini board to your PC using micro USB Type B cable
  2. Install drivers
  3. Download application SFPTotal Wizard
  4. Start SFPTotal Wizard
  5. Insert transceiver to the programmer port

Control elements

LED indication

  • POWER indicator lights up when the power is on the controller.
  • STATUS indicator flashes when the power is on and waiting for the connection transceiver to the programmer port. When transceiver is connected, STATUS led is constantly light up.
  • ERROR
  • TX_ENA
  • RX_ENA

Supported instructions