Read from transceiver

From SFPTotal Wiki
Revision as of 15:55, 27 July 2018 by Sfptotal (Talk | contribs)

Jump to: navigation, search

Follow next steps to do the reading a code from transceiver's memory:

Read-code-from-transceiver-step1.jpg

Select Module type

Read-code-from-transceiver-step2.jpg

Select Address table for reading

Read-code-from-transceiver-step4.jpg

Plug-in a transceiver to the programmer's port and push button Read from transceiver

Read-code-from-transceiver-step3.jpg

Read-code-from-transceiver-step5.jpg