Difference between revisions of "Read from transceiver"

From SFPTotal Wiki
Jump to: navigation, search
Line 4: Line 4:
  
 
: [[File:Read-code-from-transceiver-step1.jpg]]
 
: [[File:Read-code-from-transceiver-step1.jpg]]
 +
  
 
: 2. Select '''Module type'''  
 
: 2. Select '''Module type'''  
  
 
: [[File:Read-code-from-transceiver-step2.jpg]]
 
: [[File:Read-code-from-transceiver-step2.jpg]]
 +
  
 
: 3. Select '''Address table''' for reading
 
: 3. Select '''Address table''' for reading
  
 
: [[File:Read-code-from-transceiver-step4.jpg]]
 
: [[File:Read-code-from-transceiver-step4.jpg]]
 +
  
 
: 4. Push button '''Read from transceiver'''
 
: 4. Push button '''Read from transceiver'''
  
 
: [[File:Read-code-from-transceiver-step3.jpg]]
 
: [[File:Read-code-from-transceiver-step3.jpg]]
 +
  
 
: 5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
 
: 5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
  
 
: [[File:Read-code-from-transceiver-step5.jpg]]
 
: [[File:Read-code-from-transceiver-step5.jpg]]

Revision as of 15:59, 27 July 2018

Follow next steps to do the reading a code from transceiver's memory:

1. Connect a programming board to PC and run software SFPTotal Wizard.
Read-code-from-transceiver-step1.jpg


2. Select Module type
Read-code-from-transceiver-step2.jpg


3. Select Address table for reading
Read-code-from-transceiver-step4.jpg


4. Push button Read from transceiver
Read-code-from-transceiver-step3.jpg


5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
Read-code-from-transceiver-step5.jpg