Difference between revisions of "Read from transceiver"

From SFPTotal Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 22: Line 22:
  
 
: 5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
 
: 5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
 +
: If the data have been read without any error, software will show  READ OK in operation log area.
  
 
: [[File:Read-code-from-transceiver-step5.jpg]]
 
: [[File:Read-code-from-transceiver-step5.jpg]]

Latest revision as of 16:00, 27 July 2018

Follow next steps to do the reading a code from transceiver's memory:

1. Connect a programming board to PC and run software SFPTotal Wizard.
Read-code-from-transceiver-step1.jpg


2. Select Module type
Read-code-from-transceiver-step2.jpg


3. Select Address table for reading
Read-code-from-transceiver-step4.jpg


4. Push button Read from transceiver
Read-code-from-transceiver-step3.jpg


5. Result of reading will be returned to software's window. Data will be presented in HEX and ASCII grids.
If the data have been read without any error, software will show READ OK in operation log area.
Read-code-from-transceiver-step5.jpg