Read from transceiver

From SFPTotal Wiki

Revision as of 15:58, 27 July 2018 by Sfptotal (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Follow next steps to do the reading a code from transceiver's memory:

1. Connect a programming board to PC and run software SFPTotal Wizard.

2. Select Module type

3. Select Address table for reading

4. Push button Read from transceiver

5. Result of reading will be returned to software's window.

Retrieved from "http://wiki.sfptotal.com/index.php?title=Read_from_transceiver&oldid=757"