Read from transceiver

From SFPTotal Wiki

Revision as of 15:57, 27 July 2018 by Sfptotal (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Follow next steps to do the reading a code from transceiver's memory:

1. Connect a programming board to PC and run software SFPTotal Wizard.

2. Select Module type

3. Select Address table for reading

4. Push button Read from transceiver

Retrieved from "http://wiki.sfptotal.com/index.php?title=Read_from_transceiver&oldid=756"