Brute-force attack

From SFPTotal Wiki
Revision as of 14:48, 18 July 2016 by Sfptotal (Talk | contribs)

Jump to: navigation, search
Brute-force-password.jpg
Brute-force.jpg

For password recovery software supports password search function in brute force mode. This function could help if you need check passwords in a narrow range of values.

  1. Read vendor code table
  2. Change one or more bytes in the table
  3. Open Scripts -> Brute-force password
  4. Set password Table and address (default, A2 an 7B)
  5. Set range of password value
  6. Set additional options (if needed)
  7. Start brute-force attack



Example