Reading transceiver's memory

From SFPTotal Wiki
Revision as of 14:45, 20 November 2015 by Sfptotal (Talk | contribs)

Jump to: navigation, search

To perform reading of the transceiver’s memory it is necessary to:

  1. Connect the PG series programmer to a computer and run the program, or just connect the device, if the program is already running.
  2. Choose type of your transceiver (Module Type) and a table for reading (Select table).
  3. Click the button of reading the transceiver's memory:
  4. The program display a response by programming board in the history of operations and exports the data in Table tab


Notes