Difference between revisions of "Connection to PC"

Revision as of 11:02, 20 July 2016

To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer, so you need install the driver supplied for your programmer version.

Before installing the driver, please, connect your programmer to computer.

PG Series

Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip

• Installing drivers in Windows XP
• Installing drivers in Windows 7

Plus and Mini Series

Download drivers for Windows 7/8 x64: https://sfptotal.com/download/Drivers/SFPTotal%20Driver.zip

• Installing drivers for SFPTotal Plus\Mini

Download software SFPTotal Wizard

Note

1. You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
2. Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.