Difference between revisions of "Brute-force attack"
From SFPTotal Wiki
(→How to use) |
|||
| Line 8: | Line 8: | ||
# Read a vendor code from transceiver (or use random code template) | # Read a vendor code from transceiver (or use random code template) | ||
# Change at least one byte in the HEX grid. The code in software's window should be different than a code in transceiver's memory | # Change at least one byte in the HEX grid. The code in software's window should be different than a code in transceiver's memory | ||
| − | # Open ''' | + | # Open menu '''Control -> Search password''' |
# Set password Table and address (default, A2 and 7B) | # Set password Table and address (default, A2 and 7B) | ||
# Select range of password value | # Select range of password value | ||
Revision as of 17:37, 26 July 2018
For password recovery SFPTotal Wizard supports a search function in brute force mode. This function could help if you need check passwords in a narrow range of values. Also, you can fast check a password for write-protected transceivers using a dictionary of passwords.
How to use
- Read a vendor code from transceiver (or use random code template)
- Change at least one byte in the HEX grid. The code in software's window should be different than a code in transceiver's memory
- Open menu Control -> Search password
- Set password Table and address (default, A2 and 7B)
- Select range of password value
- Set additional options (if needed)
- Push Start button to begin brute-force attack
Example
