Difference between revisions of "Validation firmware checksum"
| Line 13: | Line 13: | ||
[[File:SFPTotal validate checksum.png]] | [[File:SFPTotal validate checksum.png]] | ||
| − | To set correct checksum value in the body of the firmware, click | + | To set correct checksum value in the body of the firmware, click button: |
[[File:SFPTotal set checksum button.png]] | [[File:SFPTotal set checksum button.png]] | ||
| − | After | + | After this there will be a recalculation of all checksums. |
[[File:SFPTotal_validate_checksum_result.png]] | [[File:SFPTotal_validate_checksum_result.png]] | ||
Revision as of 15:57, 17 November 2015
In the body of firmware transceiver there are two checksum that define data integrity of the firmware body. In the tabs FIRMWARE DETAIL and TABLE checksum bytes have addresses 0x3F and 0x5F.
By the default, software automatically recalculates checksum when you changed the firmware in the tables. To disable the automatic checksum verification, deselect flag in menu Options -> Auto set checksum.
To validate the checksum in the current firmware, you must use menu item Edit -> Checksum.
When pushed, the program will compare checksum values and highlight the cells with green if checksum is correct and red if not.
To set correct checksum value in the body of the firmware, click button:
After this there will be a recalculation of all checksums.
