Difference between revisions of "Connection to PC"
From SFPTotal Wiki
| (23 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer | + | To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer, so you need install the driver supplied for version of your programmer. |
| − | + | Before installing the driver, please, connect your programmer to computer. | |
| + | === Plus and Mini Series === | ||
| + | |||
| + | Download drivers for Windows 7/8 x64: https://sfptotal.com/download/Drivers/SFPTotal%20Driver.zip | ||
| + | * [[Installing drivers for SFPTotal Plus\Mini]] | ||
| + | |||
| + | After connecting the device to a PC green LED STATUS should flash, which indicates normal operation of device. | ||
| + | |||
| + | Download software [[SFPTotal Wizard]] | ||
| + | |||
| + | === PG Series === | ||
| + | |||
| + | Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip | ||
* [[Installing drivers in Windows XP]] | * [[Installing drivers in Windows XP]] | ||
* [[Installing drivers in Windows 7]] | * [[Installing drivers in Windows 7]] | ||
| − | + | ||
| + | |||
| + | == Note == | ||
| + | # You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol. | ||
| + | # Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory. | ||
Latest revision as of 14:23, 27 July 2018
To start work with the help of the software SFPTotal it is necessary to connect the programming board to your PC through USB cable. Typically, there is no default driver in the system for programmer, so you need install the driver supplied for version of your programmer.
Before installing the driver, please, connect your programmer to computer.
Plus and Mini Series
Download drivers for Windows 7/8 x64: https://sfptotal.com/download/Drivers/SFPTotal%20Driver.zip
After connecting the device to a PC green LED STATUS should flash, which indicates normal operation of device.
Download software SFPTotal Wizard
PG Series
Download drivers for Windows XP/Seven: http://sfptotal.com/download/Drivers/Drivers_SFPTotal_WinXP_Seven.zip
Note
- You can also connect to the programmer using the applications to work with serial port For example: Hyper Terminal, Putty and etc. In this case you need to use the SFPTotal command protocol.
- Using the SFPTotal command protocol, you can create your own application for working with transceiver's memory.
