View source for Read from transceiver

Follow next steps to do the reading a code from transceiver's memory:

# Connect a programming board to PC and run software SFPTotal Wizard.
: [[File:Read-code-from-transceiver-step1.jpg]]
# Select '''Module type''' 

[[File:Read-code-from-transceiver-step2.jpg]]

Select '''Address table''' for reading

[[File:Read-code-from-transceiver-step4.jpg]]

Plug-in a transceiver to the programmer's port and push button '''Read from transceiver'''

[[File:Read-code-from-transceiver-step3.jpg]]

[[File:Read-code-from-transceiver-step5.jpg]]